Power and route up to eight 500 Series modules with the Fredenstein Bento 8, a perfect companion for Fredenstein or third-party 500 Series modules.
 
This chassis is designed to provide the cleanest power to your modules that a linear power supply can deliver. Also, the rear-panel features an eight-channel XLR I/O path with switchable daisy-chaining or stereo linking for bus-compression processing.

The power supply of the Bento 8 consists of a mains transformer and linear regulators. This topology not only yields clean power but also voltages and amperages, well suited for even the most power-hungry gear. Furthermore, Bento 8 utilizes extensive magnetic shielding to eliminate any hum from the mains transformer. These two features result in a quiet performance with a high-amount of headroom—a must in modern day mixing. A power cable is included.

The Features
Built-In Audio Routing
- Modules can be daisy-chained by simply flipping switches on the back-panel
Compressor Bus Linking
- Compressor modules can be linked by engaging switches on the back-panel as well
- Ground-Lift Switch
In case of ground loops, the audio ground and the protective ground can be disconnected
 
The Specs
Input Voltage
- 117.5V or 235V (Country Specific) +/- 8%
Output Voltages
- +16V DC 2A, -16V DC 2A, +48V DC 0.25A
Power Consumption
- max 100W
Dimension (W x H x D)
- 480mm x 140mm x 190mm19 inch, 3U
Weight
- 6 kg (NW); 7.5 kg (GW), 13.2 lbs (NW); 16.6 lbs (GW)
 
Included
- 1 x Fredenstein Bento 8 500-Series Rack
- 1 x IEC Power Cable
- 1 x Operating Manual
1 Year Warranty