The AEA NUVO N22 is a modern near-field and active ribbon mic with a rugged lightweight design, extended top-end clarity, and reduced proximity effect making it perfect for close miking of instruments.
The near-field N22 is a modern ribbon mic that challenges expectations of traditional ribbon technology and can reframe the way you record with ribbons.
It delivers clarity and balance in frequency response, even when positioned just inches from the source, and can stand alone in a mix without the need for the blending additional mic signals due to its extended top-end.
A New Approach
The N22 can be positioned inches away from an instrument and retain a balanced sound with extended top end while avoiding the room tone that can cause problems in smaller spaces or iso booths. This is what makes the N22 special.
It exhibits a high-frequency bump at 3kHz making it ideal for recording vocals, electric guitar, bass cabs, kick drum, acoustic guitar, and percussion. It is best to think of the N22’s placement in terms of inches instead of feet.
The N22 naturally reduces proximity effect while also avoiding the room tone that can cause problems in smaller spaces or iso booths. Naturally rolling off the low-end before it hits the ribbon creates a much different sound than using electronic equalization to roll off the low-end in post.
Designed For Up-Close Use
The N22 was designed to be positioned between 1 and 16 inches from the sound source. It retains a balanced frequency response across the spectrum with limited proximity effect. In a traditional ribbon mic, the proximity effect can be so strong that it obscures the mid-range, which can be extremely difficult to correct.
Unlike traditional ribbon mics, think of the N22s placement in terms of inches instead of feet. Of course, near-field mics can be positioned at a distance, but they have a more balanced sound close to the sound source.
The N22 not only handles the SPL levels of a high-gain amplifier and kick drum with ease, but it also translates all the gritty details of an instrument that musicians seek.
An Active Ribbon for a Modern Age
With active electronics and a custom transformer, the N22 provides 12db of extra output and more preamp flexibility than traditional passive ribbon mics.
The N22 uses the same custom transformer utilized in the AEA A440 and R84A microphones, enabling an additional 12db of output and a stable impedance. Though it still sounds great with any AEA ribbon-optimized preamp, it is not dependent on a high impedance, high gain preamp for proper use.
The extra output is a major advantage when recording quiet sources like vocals and soft acoustic guitars. The active circuitry also prevents noise, interference on long cable runs and when near operating near large lighting rigs.
Down to Scrap Wherever, Whenever
Totally rugged. The N22 holds up to daily wear and tear with increased durability and a small profile. From outdoor gigs at music festivals to indoor theaters, NUVO mics are the perfect companion to bring the sound of studio recordings to the live stage. With the NUVO Windscreen, never worry about the ribbon – even at windy gigs.Bands now using N8s and N22s on the road include Bonnie Raitt, Alicia Keys, Aerosmith, Grizzly Bear, Mitski, Marty Stuart and his Fabulous Superlatives, Alabama Shakes, War On Drugs, Local Natives, The Head and The Heart, Sara Watkins, Kurt Vile, Deerhunter, Jamestown Revival, JOHNNYSWIM, Brandi Carlile, Autolux, Foxygen, Kruger Brothers, Cam, Pedro the Lion, The Districts, Valerie June, King Krule, The Head and The Heart, Ben Harper, Ought and more.
AEA Nuvo N22 Active Ribbon Microphone
- Extended top end with a ribbon’s classic warmth
- Near-field ribbon mic with reduced proximity effect
- Balanced frequency response at 1 to 18 inches from the source
- Compact, lightweight design with rugged durability
- Active electronics and custom transformer optimized for all preamps
- Made in the U.S.A.
Operating Principle
- Pressure Gradient Transducer
Directional Pattern
- Bidirectional
Frequency Range
- < 20 Hz to > 20 kHz
Maximum SPL
- 141 dB SPL (1% Third Harmonic > 1 kHz)
Sensitivity
- 8.3 mV/Pa (at 1 kHz, No Load)
Output Impedance
- 92 Ω Broadband
Recommended Load Impedance
- 1.0 kΩ or Greater
Phantom Power
- P48 Phantom Power, 7 mA
Polarity
- Pin 2 High for Positive Pressure at the Front of the Microphone
Polar Response
- Native Bidirectional, Figure-of-8 Pattern
Horizontal
- Up to 90 dB Rejection at Right Angles to the Front / Back Axis
Vertical
- Level Changes with Angle of Incidence, but Frequency Response is Consistent
Transducer Element Material
- Pure aluminum Corrugated Ribbon
Thickness
- 1.8 μm
Width
- 0.185 in (4.7 mm)
Length
- 2.35 in (59.7 mm)
Mic Dimensions
Height
- 8.83 in (22.5 cm)
Width
- 1.62 in (11.7 cm)
Depth
- 1.62 in (9.5 cm)
Weight
- 12 oz (335 g)
Connector
- XLR-3M