top of page

The Audix M55WS is an innovative, hanging ceiling supercardioid shotgun microphone system designed for applications where aesthetics, sound quality, and ease of installation are critical. All electronics are fully integrated with high sensitivity and low noise. The signal output is balanced to eliminate RF interference caused by cell phones and mobile devices. Dual-color LEDs indicate status.


Installing the M55 requires just one 5/8-inch hole in the ceiling, with no additional tools needed. The M55’s mounting hardware easily adjusts the hanging height up to four feet from the ceiling surface without removing ceiling tiles and allows for fingertip height adjustment.

 

Dante Made Simple
The M55WS is designed exclusively for the Audix Dante | AES67 Integrated Microphone System, which delivers high-quality audio and all microphone functions – including on-off contact closure and LED status indicators – through a single CAT5 – CAT7 cable with RJ45 connections at both interface and microphone. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost. And like all Audix microphones in the system, the gain structure is optimized for its intended use, providing quality audio at the DSP. The result is a true plug-and-play installation.

Audix M55WS Hanging Ceiling Supercardioid Shotgun Microphone

$569.00Price
Quantity
  • High output allows distance miking

    Optimized for voice recognition

    Immunity from RF interference

    Fingertip height adjustment and rotation control

    Ideal for: Conference rooms, Boardrooms, Surveillance

    Low-noise preamp circuitry

    Two-color LED status indicator

    RJ45 connectors for plug-and-play integration with the Audix Dante | AES67 Integrated Microphone System

    No external power adapter required

    Designed, machined, assembled, and tested by Audix in the USA

    An optional aiming clip (MCHANGER) easily makes any additional angular adjustments

  • Transducer Type: Condenser

    Frequency Response: 50Hz-19kHz

    Polar Pattern: Supercardioid (included)

    Optional: Cardioid, Omni, Hypercardioid

    Output Impedance: 150 ohms

    Sensitivity: 32 mV/Pa @ 1k

    Signal/Noise Ratio (A-weighted): 73 dB

    Equivalent Noise Level: (A-weighted): 21 dB

    Maximum SPL @ .5% thd: >/=130 dB

    Dynamic Range: 109 dB

    Power Requirements: 18-52 V

    Connector: 3-pin mini-XLRM

    Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3

bottom of page