.jpg)
The Audix M1255B is a Miniaturized condenser microphone with a fully integrated preamp, detachable cable, and is designed with very high sensitivity for distance miking. Applications include ceiling mount or table mount for conferencing, hanging choir miking, location recording, audience, or room miking. The M1255B has complete immunity from RF interference caused by cell phones and GSM devices. The M1255B is equipped with a Cardioid capsule and is also available with Hypercardioid, Omni, or Shotgun capsules. The microphone has the unique ability to be used in a wide variety of stage, studio, and broadcast applications. The M1255B is available with a wide array of clips and accessories for musical instruments, overhead stage miking, podiums, conferences, and presentations.
Designed, machined, assembled, and tested by Audix in the USA.
Audix M1255BW High Output Mini-Condenser Microphone for Distance Miking
- Ideal for: Acoustic instruments, Room miking, Speech
- Lightweight, low-profile with miniaturized preamp circuitry
- No external power adapter needed
- 13 mm gold vapor diaphragm
- Immune to RF interference
- Transducer Type: Condenser
- Frequency Response: 50Hz-19kHz
- Polar Pattern: Cardioid(included)
- Optional: Hypercardioid, Omni, Supercardioid
- Output Impedance: 150 ohms
- Sensitivity: 32 mV/Pa @ 1k
- Signal/Noise Ratio (A-weighted): 73 dB
- Equivalent Noise Level: (A-weighted): 21 dB
- Maximum SPL @ .5% thd: >/=130 dB
- Dynamic Range: 109 dB
- Power Requirements: 18-52 V
- Connector: 3-pin mini-XLRM
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
- Housing/Finish: Machined Brass/Powder coat