top of page
Dynacord V600:4 Multichannel Power Amplifier for Commercial Installations
The Dynacord V600:4 is perfect for small to mid-sized installation scenarios such as education, hospitality, retail, houses of worship and more. The four-channel power amplifier with a total power of 600 Watts is recommended as a go-to power amplifier for consultants, installers and specifiers who are looking for a sturdy, extremely versatile amplifier that is quick to install and runs trouble-free – even under demanding power conditions.
 
With a compact 1RU form factor requiring minimal rack space, the V600:4 is fully equipped with best-in-class features and innovative new Dynacord technologies to offer building owners an optimal combination of real professional performance and resource-efficient power consumption, all at a very attractive price point. The newly developed Dynacord powerTANK technology adds even more installation flexibility, working like a power reservoir for the amplifier. With direct access to the total power of 600 Watts, the V600:4 can deliver asymmetric power across all channels as needed. There is no waste of energy, which allows great flexibility – especially when driving multiple audio zones with different loads. For example, a single V600:4 can simultaneously serve as system drive for the compact loudspeakers in a small zone (such as a kitchen area) as well as for larger loudspeakers (such as in an auditorium). Contributing to the ease of installation, this feature does not require any special configuration skills – powerTANK engages automatically. In conjunction with a DSP matrix – such as the Dynacord MXE5 Matrix Mix Engine – the V600:4 can also be specified for larger distributed installations working as a distribution amplifier for smaller zones.

Dynacord V600:4 Multichannel Power Amplifier for Commercial Installations

$1,149.00Price
Quantity

  • - 4-Channel Amplifier

    - 600W Total powerTANK Capacity

    - dualCOOL Convection + Fan Cooling

    - Drive at 4 or 8 Ohms & 70 or 100V Loads

    - ecoRAIL for Reduced Power Consumption

    - Variable Load Drive to All Channels

    - For Background Music and Announcements

    - Euroblock Connectors

    - Limited 3-Year Warranty

  • Electrical

    - Rated output power: 4x 150 W

    - Maximum output power per channel (power sharing) 1 at minimum impedance: 4Ω 500 W: 8Ω 600 W: 70 V 500 W: 100 V 600 W

    - Total rated output power: 600 W

    - Number of channels: 4

    - Output voltage rated output power: 4Ω 24.5 V RMS: 8Ω 34.6 V RMS: 70 V 70.7 V RMS: 100 V 100 V RMS

    - Maximum output voltage: 4Ω 40.0 V RMS: 8Ω 56.0 V RMS: 70 V 70.7 V RMS: 100 V 100 V RMS

    - Rated impedance per channe: 4Ω: 8Ω: 33.3Ω: 66.7Ω

    - Minimum impedance per channe: 2.6Ω: 4Ω: 10Ω: 16.7Ω

    Amplifier

    - Nominal Gain (+6 dBu input sensitivity, LEVEL 0 dB): 4Ω 24.0 dB: 8Ω 27.0 dB: 70 V 33.2 dB: 100 V 36.2 dB

    - Maximum Gain (0 dBu input sensitivity, LEVEL +6 dB): 4Ω 30.0 dB: 8Ω 33.0 dB: 70 V 39.2 dB: 100 V 42.2 dB

    - THD+N (1/8 rated output power, 1 kHz): < 0.1 %

    - Crosstalk (ref. 1 kHz, 12 dB below maximum): 4Ω < -80 dB: 8Ω < -85 dB: 70 V < -90 dB: 100 V < -95 dB

    - Frequency Response2 (ref. 1 kHz, analog in to speaker out, -3 dB): HP: 30/100/150 Hz to 20 kHz, LP: 30 Hz to 150 Hz: HP: 50/100/150 Hz to 20 kHz, LP: 50 Hz to 150 Hz

    - Damping Factor (30/50 Hz to 1 kHz, ref. to rated impedance): 4Ω > 80: 8Ω > 160: 70 V > 500: > 100 V 1000

    - Output Stage Topology: Class D, fixed frequency

    - Signal to Noise Ratio (A-weighted, ref. to rated output power, LEVEL 0 dB): 4Ω > 98 dB: 8Ω > 100 dB: > 70 V 101 dB> > 100 103 dB

    - Output Noise (A-weighted, LEVEL 0 dB): 4Ω < -68 dBu: 8Ω < -67 dBu: 70 V < -62 dBu: > 100 < -61 dBu

    Connectivity

    - Analog Audio Input - Type: 2x 6-pin Euroblock, 3.81mm, male, parallel 1x RJ45 AMP-LINK, Maximum input level (LEVEL 0 dB): +18 dBu, Input impedance, active balanced: 20 kΩ, Mains Input: IEC C14

    - Loudspeaker output: 2x 4-pin Euroblock, 5.08mm, female

    - Control Port - Type: 1x 5-pin Euroblock, 3.81mm, male, REMOTE ON: Remote On/Standby contact (overrides power button on front panel), READY/FAULT: Galvanic isolated relay

    General

    - Signal processing: Input Routing, HPF 24 dB/ Oct., LPF 24 dB/Oct., Flat, Peak Limiter

    - Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC

    - Consumption at 1/8 rated output power: 115 W

    - Idle mode (ecoRAIL with no input signal): < 20 W

    - Standby mode (APD active): < 1 W

    - Power supply topology: Switching power supply with power factor correction

    - Protections: Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection

    Environmental

    - Climatic conditions: Cooling concept - Convection cooling in tabletop application and rack application with spacing between units. Forced cooling (side to rear) in rack application without spacing between units and in extreme thermal conditions.

    - Ambient temperature limits: +23 °F to +113 °F

    - Altitude (operating): -1614 ft to 16404 ft

    Mechanical

    - IEC Protection Class: Class I (grounded)

    - Dimensions (HxWxD) With 19" mounting brackets: 1.74x19.2x10.6"

    - Weight: 7.9 lb

bottom of page