top of page

More than suitable for live-music performances and DJ setups, the JBL JRX225 provides dual 15" woofers, and thus, offers much in the way of low-end without muddying up the midrange of your signal, providing a solid solution if you're looking for a speaker capable of reproducing thick, lower frequencies without a subwoofer. It can handle between 500 and 1000W into 4 Ohms, and it provides SpeakON and 1/4" TS phone jacks. The JRX225 offers other features such as a rugged 19mm MDF enclosure, steel handles, and a perforated steel grille. Its high-frequency driver is protected by SonicGuard technology, while its waveguide provides coverage control, minimized distortions, and an even frequency response. 

JBL JRX225 2000W 15" 2-Way Reinforcement Loudspeaker Single

$629.00Price
Quantity
  •  

    Dual JBL low-frequency drivers with a 2.5"-diameter edgewound-ribbon voice coil

    JBL 2414H-C 1"-polymer-diaphragm compression driver

    Crossover design shapes frequency response, delivering coherent summation in the crossover region

    "Quasi 3-Way" design provides low-end without sacrificing performance in the critical midrange; the upper woofer produces mid-frequencies and bass, while the lower woofer concentrates on bass only, thus resulting in a reduction of midrange phase cancellation

    High-voltage capacitors and inductors with cores and heavy-gauge wire enable the crossover network to handle high power without saturating

    High-frequency waveguide provides coverage control, reduced distortion, and smooth frequency response

    The rugged, acoustically efficient enclosure is constructed from 19mm MDF (Medium Density Fiberboard) to ensure durability and low-frequency performance

    SonicGuard protects the high-frequency driver from excess power without interrupting performance

    Non-resonant, all-steel handles

    18-gauge perforated steel grille protects components from damage

    For Live Stage, Theater, DJ Setups

    2 x 15" Woofers

    500 to 1000W into 4 Ohms

    42 Hz to 18 kHz Frequency Range

    Aids in Providing Low-End Without Sub

    SpeakON and 1/4" TS Phone Jacks

  • Speaker Configuration

    Passive Setup

    Type: 2-Way full range

    LF driver: 2 x 15"

    HF driver: 1"

    Power Capacity (passive)

    8 ohms program/peak: N/A

    4 ohms program/peak: 500W/2000W

    Audio

    Frequency response: 45Hz–12kHz

    - Coverage pattern: 90º x 50º

    Max SPL: 133dB

    Enclosure

    Construction: .75" MDF

    Width: 18.25"

    Height: 43.25"

    Depth: 17"

    Weight: 94 lb.

    Inputs

    XLR: 2

    TRS: 2

bottom of page