top of page
LEA Professional CONNECT 64 60-Watt 4-Channel Power Amplifier
Ideal for sound installations in small- to moderate-sized spaces, the LEA Professional CS64 is a 4-channel, 240W Class-D power amplifier in a 1/2-rack form factor, capable of delivering 60W per channel, and supporting impedance loads of 2, 4, or 8 ohms, as well as 25, 70 or 100V Hi-Z output loads per channel. Designed for fast easy network control, the CS64 sports network connections via the 100 MB/s Ethernet input port, Wi-Fi, and built-in Wi-Fi with both access-point and local Wi-Fi support. These allow you to easily connect to external control devices including web- and (internet-of-things) IoT-based cloud services. Plus, you get an analog input for direct remote I/O control.
 
The CS64 features balanced analog Amphenol Anytek block terminal I/O for balanced line inputs, unbalanced RCA line inputs, and speaker outputs. The Smart Power Bridge technology lets you dynamically double power on each channel when needed without sacrificing the power quality on other channels. This amp includes all necessary block terminal cables for each input and output, two removable and washable foam filters for the front air intake, and one IEC power cable, to get you started right away.

LEA Professional CONNECT 64 60-Watt 4-Channel Power Amplifier

$1,300.00Price
Quantity

  • - Web browser-based UI works on any device with no software to download

    - Direct Lo-Z and Hi-Z (70 or 100V) selectable per channel

    - Proprietary Smart Power Bridge doubles the output power of any single channel without sacrificing other channels on the amplifier

    - 3 Ways to Connect to the amplifier

    - Built in Wi-Fi access point

    - Connects to existing Wi-Fi network

    - Local Area Network Ethernet connection

    - 3rd party API support for most of the industry leading system processors on the market

    - 96 kHz Analog Devices DSP with linear phase FIR filters, up to 4 seconds of delay, input routing, multiple 48 dB/oct crossover filters, 8 parametric EQ filters, user-configurable speaker limiters, and real-time load monitoring

    - Universal switch mode power supply with PFC. Operation from 100 to 240 VAC +/-10%

    - Fully routable balanced Block or unbalanced RCA analog inputs via input matrix and input mixer in Web UI, SharkWare, or Cloud platform

    - External I/O port for on/off and fault monitoring

    - Highly efficient Class-D output stage for low AC current draw

  • Audio

    - Inputs: Analog: 4 Balanced Inputs with user selectable 26dB, 34dB, and mic level input sensitivity

    - 4 unbalanced RCA inputs with user-selectable 26dB and 34dB input sensitivity

    ***Note - Unbalanced and RCA inputs share the same analog input channel

    - THD+N: 0.1% (20Hz to 20kHz)

    - Frequency Response: 20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω

    - Signal to Noise level:102dB (20Hz to 20kHz referenced to 8Ω)

    - Crosstalk: 70dB (20Hz to 20kHz)

    - Amplifier Output Classification: Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel

    DSP

    - DSP Architecture: Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters

    - Input Matrix: Routable matrix; any input to any output with primary and secondary input priority

    - Crossovers: Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth)

    - Parametric EQ: 8 Band Parametric EQ per channel

    - Output Delay: 100ms per channel

    - Output Protection: DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection

    - User Adjustable Limiting: Peak Voltage and RMS Voltage

    - Load Monitoring: Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources

    - Control. Monitoring, Networking:

    - User Interface: Web Browser User Interface, 3rd Party API control, Cloud Control, or SharkWare

    External I/O

    - External I/O In: Toggles Remote On/Off

    - External I/O Out: Indicates Amplifier Health

    - 4 general Purpose input and output pins for general input

    - Triggering and output statuses - Coming Soon

    Operation

    - AC Mains: 100VAC - 240VAC +/- 15% 50Hz or 60Hz

    - Power Supply: Universal Switch Mode Power Supply

    Physical

    - Dimensions (HxWxL): 1.71"x8.58”x11.82”Weight: 7 lbs.

    Cooling

    - Front to Rear Variable Fan Speed Cooling

    - Fan Noise at idle is 50dB @ 1m

    - Fan Noise at 50% is 57dB @1m

    - Fan Noise at full speed is 63dB @ 1m

bottom of page