top of page
The Tascam ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors.
The ML-32D has four D-Sub inputs and four D-Sub outputs, which can easily be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into – or extracted from – the Dante audio stream.
Now compatible with SMPTE ST 2110-30Dante module firmware V1.2.0.0 now supports SMPTE ST-2110-30, which will enable a smooth IP transmission of PCM digital audio for structuring broadcast systems.
Audinate's provided Dante Domain Manager (DDM) v1.1 or higher is required for the operation of SMPTE ST 2110-30.For more information about DDM, please visit Audinate's website.https://www.audinate.com/products/software/dante-domain-manager/
SMTPE ST 2110SMPTE ST-2110 is a video and audio IP network standard defined by SMPTE (Society of Motion Picture and Television Engineers). SMPTE ST-2110 is designed to separately embed and transmit video, audio, and ancillary signals, reducing the de-embedding processing load and network load of each device, while also enabling users to de-embed only the packet data they desire for further edit. ST-2110-30 realizes IP transmission of PCM digital audio, enabling high-precision synchronization using PTP (IEEE1588-2008) and low-latency transmission. It is expected to become a network standard protocol in next-generation broadcasting systems.
About DanteDante is a transmission protocol developed by Audinate. It enables multi-channel transmission (512ch IN/512ch OUT) and word-clock sync with high accuracy via network with gigabit Ethernet standard.For further information about Dante, please visit Audinate website below.https://www.audinate.com/
Features Equipped with Dante interfaces
  • Dante primary and secondary connectors support redundancy
  • Compatible with SMPTE ST 2110-30
  • AES67 is also supported. Possible to connect with AES67-compatible network audios including Ravenna
  • Dante Controller enables flexible routing
  • 32-channel analog line input/output
    • Supports up to 96kHz/24bit
    • Equipped with a signal/overload indicator that enables level monitoring of analog input/output signals
    • 5 selectable reference levels which can accommodate to a variety of scenes including professional usages, public addresses, and usages in broadcasting studios
    • Equipped with a STATUS indicator for indicating failures and errors of the device
    • Firmware update via a Dante interface is possible
    • Equipped with D-sub 25-pin connectors as line input/output connectors
    • 1U rack mount size
    • Using an optional BO-32DE (D-sub/Euro Block breakout box) enables supporting Euro Block connectors which are optimal for professional usages
    • Using an optional BO-16DX/IN and BO-16DX/OUT (D-sub/XLR breakout box) enables supporting XLR connectors which have multiple usages including usage as a stage box.

    This is a Special Order Item

    Tascam ML-32D Analog to Dante Converter

    $2,999.00Price
    • Tascam ML-32D Analog to Dante Converter
    • The Tascam ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors.
    bottom of page