The GC Audio Rack 500 is a high-end 10 slot chassis with external power supply, compatible with all standard 500 series modules. The chassis is made of 1.5mm thick steel, 50% thicker than other 500 racks on the market, offering excellent shielding against electromagnetic radiation for optimal isolation of the 500 modules it receives.
 
Uncompromising construction
GC Audio’s Rack 500 design starts with a more robust construction than the norm. Its chassis is made of 1.5mm steel, solid as a tank! The thickness of the sheet metal is 50% thicker than the average and offers an excellent shielding against electromagnetic radiation for an optimal isolation of the 500 modules it receives. It is coated with satin paint for the front and back and a double layer industrial paint for the chassis. In addition to the studio application, its robustness allows for intensive use on the road, such as on tour.
 
High-end connectors and Link modules
The rear panel features a full set of Neutrik connectors: Combo for the inputs and XLR or 1/4″ 3pts jack for the outputs. So, whether you have XLR or TRS jack, you will be able to connect to the rack in any case.

Instead of having to connect the modules together with a cable, the Rack 500 has 5 internal switches to instantly connect the signal of a mono module to the adjacent mono module. This function allows to quickly create a stereo pair for 2 mono modules (on pin 5 of the module, following the 500 standard).
 
The GC Audio Rack 500 offers very high performance with optimum stability, low noise & optimized isolation. The Rack 500 is also available with external power supply.
 
Position
This product is designed and screened to minimize internal electromagnetic emissions and provide immunity to external electromagnetic fields. To reduce the risk of performance degradation due to external interference, do not site this unit close to sources of strong magnetic fields such as power supplies, power amplifiers, loudspeakers etc.
 
Rack Mounting  
This product is designed to be rack mounted using the screws and washers supplied to help preserve the finish of the facia panel. The facia graphic layer is under-surface printed to provide a robust hard-wearing surface designed to last the life of the product in virtually any operating environment. Failure to use the supplied fixings may result in damage to the facia surface which can invalidate the warranty. It is recommended that additional rack-mount side supports are used in conjunction with the facia panel fixings, particularly when the unit is mounted in a flite case or vehicle where vibration and transit shocks can be expected.
 
Cleaning  
The product should be cleaned with a soft brush around the controls. If the facia becomes dirty, use a damp cloth with a little household soap to remove the dirt. DO NOT use solvent cleaners under any circumstances or the facia may be permanently damaged, and warranty invalidated!
 
Audio Connections  
Two 3 pin XLR connectors are provided in back side. Inputs are female, outputs are male. All connectors follow the European wiring convention: Pin 1 = Screen Pin 2 = Hot (+) Pin 3 = Cold (-). Jack input for instrument in front side.